Tile & Stone Takeoff Software for Floors, Walls and Showers
Measure every tiled surface, trace trim and edges, and price tile, setting materials and labour room by room.
What you measure
Floor tile (SF)
Trace tiled floors per tile type; cut out tubs and vanities.
Wall & shower tile
Trace shower walls in elevation or set wall height in the conversion.
Trim & edge (LF)
Trace metal trim, bullnose and transitions.
Niches & benches (EA)
Count niches, benches and curbless pans.
How a job runs
- Step 1
Upload plans, elevations and the finish schedule.
- Step 2
Trace floors and walls by tile; trace trim.
- Step 3
Convert area into boxes, thinset, grout and membrane.
- Step 4
Send the proposal with tile allowances.
What you price
Why tile & stone businesses switch
Tile setters often estimate from a measuring tape and a spreadsheet. TrueScope measures the drawings and includes setting materials automatically through conversions.
Setup tip
Set 1 SF of tile = 0.02 bags of thinset and 0.006 bags of grout so every traced area also orders setting materials.
Common questions
Yes. Trace them on the elevations, or trace the shower perimeter on the floor plan with the wall height in the conversion.
Yes. Price tile as an allowance per square foot and adjust when the client picks the tile.
Try Takeoffs on your next tile & stone job.
30-day free trial · no credit card · every module included