Paving & Asphalt Takeoff Software
Measure paving areas, trace curbs and stripes, count stalls and arrows, and turn it into tons, gallons and a priced bid.
What you measure
Paving areas (SF / SY)
Trace new asphalt, overlay and base; cut out islands.
Curbs & striping (LF)
Trace curb, gutter and painted lines.
Stalls & symbols (EA)
Count stalls, arrows, accessible symbols and wheel stops.
Patching & crack fill
Trace patches as areas and cracks as lengths.
How a job runs
- Step 1
Upload the site plan.
- Step 2
Trace paving, curbs and striping; count symbols.
- Step 3
Convert area into tons of asphalt and gallons of sealer.
- Step 4
Bid it and schedule the crew.
What you price
Why paving & asphalt businesses switch
Paving bids are often measured on satellite images and priced in a spreadsheet. TrueScope measures the site plan and does the tonnage and gallon conversions on the product.
Setup tip
For 2 in of asphalt at 110 lb per SY-inch, set 1 SF = 0.0122 tons.
Common questions
Yes. Set tons per square foot at your thickness on the asphalt product.
Yes. Use count markers for stalls, arrows and symbols.
Try Takeoffs on your next paving & asphalt job.
30-day free trial · no credit card · every module included