Irrigation Layout & As-Built Drawing Software
Place heads and valves with your own symbols, draw pipe by size, and keep an as-built every service tech can open on a phone.
What you draw
Zone layouts
Heads and valves per zone with your symbols.
Pipe runs
Mainline and laterals by size on layers.
Controller & backflow
Equipment locations and wire routes.
As-builts
Final layouts for the client and service visits.
How a job runs
- Step 1
Insert and scale the site plan.
- Step 2
Place head and valve parts by zone.
- Step 3
Draw pipe on layers per size.
- Step 4
Save the as-built and share it with service techs.
Parts you save once
Why irrigation businesses switch
Irrigation as-builts often live in a binder or nowhere. A drawing in TrueScope is on every tech's phone at the next service call.
Setup tip
Put each pipe size on its own layer and colour so the as-built is readable on a phone screen.
Common questions
No. It is for layouts, parts lists and as-builts, not hydraulic design.
Try Drafting on your next irrigation job.
30-day free trial · no credit card · every module included